72 NOT Answered Yet Test Questions:
(hold on, will be updated soon)1. Which of the following is a connector specification for USB?
Answers:
• Series- A
• Series- B
• Mini- A
• All of the above
2. Which of the following is a type of USB adapters?
Answers:
• USB- to- Ethernet
• USB- to- keyboard
• USB- to- SCSI
• All of the above
3. By which of the following names are USB and IEEE 1394 also called?
Answers:
• i .link
• Fire wire
• Hot wire
• Both a and b
4. In half duplex communication , data may travel.
Answers:
• in one direction
• in both directions but not simultaneously
• in both directions simultaneously
• None of the above
5. How many devices can be connected to a single IEEE 1394 adapter card by way of daisy- chaining?
Answers:
• 32
• 63
• 16
• 4
6. Which of the following is a technique to minimize the effects of errors on a disc?
Answers:
• Gross- internal code (GIC)
• Cross interleave reed- solomon code(CIRC)
• Crat – external peach code (CEPC)
• None of the above
7. 16450 UART was basically used for.
Answers:
• low speed communication
• high speed communication
• buffer data storage
• None of the above
8. Which of the following memories requires a periodic refresh?
Answers:
• DRAM
• SRAM
• ROM
• Flash memory
9. The Legacy free systems have.
Answers:
• only serial ports
• only parallel ports
• both serial and parallel ports
• only a USB port
10. Synchronous data transfer is used to transfer data at a speed of.
Answers:
• greater than/equal to 1 Kbps
• greater than/equal to 5 Kbps
• greater than/equal to 10 Kbps
• greater than/equal to 20 Kbps
11. In synchronization with which of the following does SDRAM, a type of DRAM, run?
Answers:
• CPU
• Peripherals
• Memory bus
• Hard disc
12. Which of the following is a difference between a DVD and a CD?
Answers:
• A DVD's pits and lands are much larger than those on a CD
• A DVD's pits and lands are much smaller than those on a CD
• A DVD's pits are smaller and lands are longer than those on a CD
• A DVD's pits are larger and lands are smaller than those on a CD
13. Eight bit ISA bus systems have.
Answers:
• 8 interrupt request lines (IRQs)
• 16 IRQs
• 32 IRQs
• 64 IRQs
14. The transfer rate of I/O buses is also called.
Answers:
• the bandwidth of a bus
• the Nyquist rate of a bus
• the baud rate of a bus
• the flow rate of a bus
15. Which of the following is a CD file system format?
Answers:
• High sierra
• Joliet
• UDF
• All of the above
16. RDRAMs are narrow channel devices. They transfer data at the rate of.
Answers:
• 8 bit at a time
• 16 bit at a time
• 32 bit at a time
• 64 bit at a time
17. USB 2.0 standard has a speed of _____.
Answers:
• 12 Mbps
• 1.5 Mbps
• 480 Mbps
• 165 Mbps
18. How many individual RDRAM devices can a single rambus memory channel support?
Answers:
• 8
• 16
• 32
• 64
19. USB allows up to _____ devices to run simultaneously on a single bus.
Answers:
• 256
• 127
• 64
• 32
20. Which of the following can express a Cache memory's effectiveness?
Answers:
• Miss ratio
• Hit ratio
• Lock out ratio
• Find ratio
21. Which of the following is not a data encoding scheme used in magnetic storage?
Answers:
• Frequency modulation
• Modified frequency modulation
• Amplitude modulation
• Run length limited
22. To which generation of development does the PCI express bus belong?
Answers:
• First generation
• Second generation
• Third generation
• Fourth generation
23. BISYNC is a byte controlled protocol. It is usually set up for.
Answers:
• half-duplex
• simplex
• full-duplex
• None of the above
24. USB eliminates the need for.
Answers:
• special purpose ports
• special purpose I/O cards
• reconfiguring the system with each new device added
• All of the above
25. Which one of the following is not a local bus?
Answers:
• VESA
• PCI
• AGP
• ISA
26. Which of the following wafers is used in the manufacturing of a compact disc (CD)?
Answers:
• Polycarbonate
• Polyoxide
• Polycalcium
• PVC
27. Which USB standard is called on-the-go standard?
Answers:
• USB 1.0
• USB 1.1
• USB 2.0
• USB 2.2
28. The eight-bit ISA expansion slot resembles which of the following options?
Answers:
• The tongue and groove system
• The nut and bolt system
• The male and female connector
• None of the above
29. BISYNC is a byte controlled protocol. It is usually set up for ________ transmission.
Answers:
• half-duplex
• simplex
• full-duplex
• None of the above
30. Signal skew problem is more evident in which of the following.
Answers:
• serial communication
• parallel communication
• Both a and b
31. In data capacity measurements, one mebibyte is equal to _____.
Answers:
• 2¹Âº bytes
• 2¹² bytes
• 2²° bytes
• 2³Âº bytes
32. Which of the following topologies does USB 1.1 use?
Answers:
• The bus topology
• The ring topology
• The star topology
• The tiered star topology
33. Which of the following ports uses a parallel architecture (parallel buses)?
Answers:
• USB
• IEEE 1394
• SCSI
• All of the above
34. Devices which support USB standard are referred to as.
Answers:
• a medium storage class (MSC)
• a mass storage class (MSC)
• a mass save class (MSC)
• a master save class (MSC)
35. The Intel 8250 is_____.
Answers:
• a synchronous communication controller
• an asynchronous communication controller
• A timer/counter
• None of the above
36. Which of the following is a type of hard disc drive slider?
Answers:
• Mini
• Micro
• Pico
• All of the above
37. In NRZI (Non return to zero invert) encoding, a "1" is represented by.
Answers:
• no change in the signal level
• a change in the signal level
• a high level
• a low level
38. On which of the following devices are pits and lands found?
Answers:
• Hard disc
• USB device
• CD
• All of the above
39. Which of the following is not a type of serial communication?
Answers:
• Simplex
• Half-Duplex
• Double–Duplex
• Full–Duplex
40. The heart of any serial port is the.
Answers:
• UART chip
• USART chip
• Timer/counter chip
• Oscillator ckt.
41. USB is similar to.
Answers:
• IEEE 1394
• IEEE 844
• IEEE 1243
• IEEE 840
42. By which of the following principles do all magnetic storage devices read and write data?
Answers:
• Electromagnetism
• Induction
• Ohm's law
• Coulomb's law
43. The keyboard in a PC communicates with the main system.
Answers:
• through a special serial data link
• through a USB port
• both a and b
• through a parallel port
44. DDR SDRAM stand for.
Answers:
• double data rate SDRAM
• delay data rate SDRAM
• daisy data rate SDRAM
• dot data rate SDRAM
45. DVD stands for a _____.
Answers:
• digital versatile disc
• digital variable disc
• data video disc
• data versatile disc
46. The PCI bus is often called a _____
Answers:
• horse bus
• lion bus
• mezzanine bus
• catalyst bus
47. By which of the following components is data retained in DRAM?
Answers:
• Inductors
• Capacitors
• Transistors
• FET
48. Which of the following encoding techniques is employed by USB?
Answers:
• Return to zero(RZ)
• Non-return to zero invert(NRZI)
• Return to zero invert(RZI)
• Return to zero non-invert(RZNI)
49. IEEE 1284.
Answers:
• is a serial port standard
• is a parallel port standard
• can act both as a serial and a parallel port standard
• None of the above
50. How much data can a typical CD hold?
Answers:
• 650 Gbytes
• 650 Gibytes
• 650 Tbytes
• 650 Mibytes
51. The initial implementations of IEEE 1394B require.
Answers:
• a nine wire interface
• a three wire interface
• a two wire interface
• a one wire interface
52. By which of the following techniques is a standard DRAM accessed?
Answers:
• Refreshing
• Paging
• Sequencing
• Filing
53. Which one of the following combinations is used to transfer information through the memory bus?
Answers:
• CPU and main memory
• CPU and peripherals
• Main memory and peripherals
• All of the above
54. Which of the following is a type of head used in hard discs?
Answers:
• Ferrite
• Magnetic resistive (MR)
• Thin film (TF)
• All of the above
55. For Which of the following devices is Arial density used as a parameter of performance?
Answers:
• USB device
• Hard disc
• Flash memory
• DRAM
56. The IEEE 488 standard is.
Answers:
• for synchronous transmission
• for asynchronous transmission
• for serial data transfer
• a general purpose interface bus (GPIB)
57. By which of the following methods can higher data densities in magnetic storage devices be achieved?
Answers:
• Longitudinal recording
• Perpendicular recording
• Straight recording
• Plane recording
58. Which of the following encoding schemes can pack maximum information on a magnetic storage device?
Answers:
• RLL encoding
• FM encoding
• MFM encoding
• None of the above
59. Which of the following defines a nanosecond?
Answers:
• One billionth of a second
• One billionth of a minute
• One millionth of a second
• One millionth of a minute
60. Which of the following memories can retain its contents without power?
Answers:
• DRAM
• SRAM
• Flash memory
• All of the above
61. Which of the following is a technique used to encode data on a disc?
Answers:
• Frequency modulation (FM)
• Eight- to- fourteen modulation(EFM)
• One- to- eight modulation (OEM)
• Phase modulation (PM)
62. Another name for the processor bus is.
Answers:
• a back side bus
• a front side bus
• an all side bus
• a two side bus
63. Which of the following connections is used by USB 1.1?
Answers:
• Two-wire
• Three –wire
• Four-wire
• Six-wire
64. How many interrupt requests are required by USB?
Answers:
• A single interrupt request
• Two interrupt requests
• Three interrupt requests
• Four interrupt requests
65. A USB flash drive is a _____ type flash memory data storage device.
Answers:
• AND
• NOR
• NAND
• X-OR
66. Which of the following buses is designed for high performance graphics and video support?
Answers:
• PCI
• AGP
• ISA
• VESA
67. USB conforms to.
Answers:
• Intel's plug and play (pnp) specifications
• Intel's cold plugging
• rebooting the system before use
• All of the above
68. Which one of the following resembles the 8 bit ISA expansion slot?
Answers:
• The tongue and groove system
• The nut and bolt system
• The male and female connector
• None of the above
69. By which of the following is the Jitter problem, which accrues in I/O buses, defined?
Answers:
• It is the tendency for the signal to reach its target voltage and float above and below
• It is the delay in clock signals
• It is an electromagnetic interference between two wires in parallel communication
• It is a type of crosstalk
70. The overall character rate of synchronous serial communication is more because.
Answers:
• there are separate clock signals for the transmitter and the receiver
• there is a common clock signal for the transmitter and the receiver
• the start and stop bit can be eliminated in synchronous communication
• the characters can come at any rate
71. Which of the following is a compact disc format?
Answers:
• Red book
• Yellow book
• Green book
• All of the above
72. When music is recoded on a CD, it is sampled at the rate of _____.
Answers:
• 20,000 times per second
• 30,050 times per second
• 44,100 times per second
• 88,400 times per second
No comments:
Post a Comment